OVERVIEW

This article describes the process of preparing a model for prototyping on the Stratasys FDM machine.

Recent Fab Lab Responses

8/14 @ 4:50 PM
#5259: Matt
Test passed.
8/14 @ 4:49 PM
#5260: Matt
Test passed
5/20 @ 8:53 AM
#5095: Matt Bernhardt
The problem had been solved before I got down to check thing...
5/20 @ 8:52 AM
#5118: Matt Bernhardt
The lens has been cleaned. It is much better now, but will p...
5/7 @ 4:28 PM
#5090: Matt Bernhardt
Not sure either, but I'll keep an eye on it. Thanks.
5/5 @ 9:33 AM
#5083: Matt Bernhardt
The M-300 had been set to communicate via serial port - whic...
4/29 @ 1:13 PM
#5071: Matt Bernhardt
The origin of the laser cutter had been set incorrectly. Aft...
4/28 @ 9:14 AM
#5069: Matt Bernhardt
Troy got to it before I got down there.
4/22 @ 1:33 PM
#5042: Matt Bernhardt
The Y axis has been re-homed
4/18 @ 7:59 AM
#5034: Matt Bernhardt
The ShopBot was working normally this morning at 8 AM. I'm s...