How to Print to the OCE 320 Plotters using:
(36" Grayscale Plotter)
Autodesk AutoCAD
*No Images or Fills*
 Select "File" and "Plot" from the drop down menu in
the top tool bar menu. You should then see a Plot dialog box like the one
shown to the left (Figure A).- Select the plotter you wish to use. KH 448-x OCE 320 PS
- Select the word “Properties” to the right of the plotter
 Now "click on the button that says”Custom Properties...”.
(See Figure B) Click on the “Advanced…” Button (See Figure C) Select the paper size that you would like to plot with.
(Figure D)- If you are printing with
Ansi C or D, or you are printing with Arch C+ or D+, change the rotation
field to say 90°.
If the Page size is Ansi E or Arch E+ then the rotation field should be 0°.
- Press the OK button back to the first print dialog box
 In this window (Figure E) are asked to use a temporary PC3 file. Press
OK Once back to Figure F, check all of the remaining settings for the plot.
A. Paper Size
B. Plot Area
C. Plot Scale
D. Plot Style Table
E. Drawing Orientation
F. Plot Offset
Click here for a PDF version of these instructions.
|
Save This Page